It appears you do not have Macromedia Flash Player installed or it is an old version.

Please click here to get it, then come back.

Archive for the ‘Product Safety Recall’ Category

Cardiac Science Corporation Issues AED Recall

Tuesday, November 17th, 2009

 

Cardiac Science Corporation recalled AED due to device failure which could lead to death to patients.

Cardiac Science Corporation is initiating a voluntary field correction after it was determined certain automated external defibrillators (AEDs) may experience a rare product issue in which the AED may not be able to deliver therapy during a resuscitation attempt. Device failure may affect resuscitation of the patient, which could lead to serious adverse events or death. These AEDs have electronic components which may fail and the failure may not be detected by the device’s periodic self-tests. The affected models include the Powerheart 9300A, 9300C, 9300D, 9300E, 9300P, 9390A, 9390E, and CardioVive 92531, 92532, and 92533 devices.

Cardiac Science has received a total of 64 complaints concerning four resistors within certain AEDs. Two of these complaints were associated with a failure to deliver therapy. This issue is predicted to occur in approximately one in 75,000 AEDs manufactured between August 2003 and August 2009. The company has also received 114 complaints regarding “Service Required” messages resulting from a specific relay switch failure. There have been no reported instances where this issue has resulted in an inability to deliver therapy.

Until a correction is available in May, 2010, the company strongly advises customers to check the status indicator on the front of the AED and follow the procedures documented in the materials accompanying the AED. The company advises that customers leave their AEDs in service.

“When customers choose a product from Cardiac Science, they expect outstanding reliability,” said Dave Marver, president and chief executive officer. “We understand the role our products play in public health and are taking appropriate measures to further improve the performance of our products.”

The company has implemented more stringent testing of the components and all AEDs produced since August, 2009 are unaffected. Customers in possession of an AED that may exhibit either of these issues will be notified immediately. A software update to address the resistor issue will be available by May, 2010. This software update will enhance the AED’s self-test capabilities and improve detection of the issue. In the interim, the company advises customers to keep their AEDs in service and follow the normal testing and maintenance procedures found in the Operator and Service Manual. A copy of these procedures is available at www.cardiacscience.com/AED175. At this site, customers may confirm if their AED is affected and register for automatic e-mail reminders to conduct scheduled maintenance.

If the AED is not rescue ready (the indicator is red) customers should contact the company immediately at 425.402.2000 (option 1) within the United States. Outside the US contact +44.161.926.0011 or the local Cardiac Science representative. Customers can also email the company at AED175@cardiacscience.com.




Add to Technorati Favorites

My Zimbio
Top Stories


AC Computer Adapters recalled

Friday, November 6th, 2009

Sony Recalls Computer AC Adapters Due to Shock Hazard

The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

69,000 of the Sony VAIO AC  Adapters out of San Diego, California were recalled.  It appears that the insulation inside the adapter can fail over time, posing an electrical shock hazard. There have been four reports of the adapters short circuiting.  None of these occurred in the US and no injuries have been reported.

Consumers should turn off their computer, unplug it and stop using the recalled AC adapters immediately and contact Sony to arrange for a free replacement of the affected AC adapter.The recalled AC adapter model is the Sony VGP-AC19V17, which was supplied for use with the following Sony products:

Product Types Using the AC Adapters

  • All-in-one VAIO Desktop Computers
  • VAIO Docking Stations

Product Models Using the AC Adapters

  • VGC-LT series and VGC-JS2 series
  • VGP-PRBX1 and VGP-PRFE1

These adapters were sold at SonyStyle stores and Web site, authorized electronics retailers and authorized business- to- business dealers nationwide from September 2005 through October 2009 for between $900 and $3300 for desktop computers and $250 and $300 for docking stations.

Consumer Contact: For more information, contact Sony toll-free at (877) 361-4481 anytime, or visit the firm’s Web site at esupport.sony.com/ac19adapter

Sony ACSony AC

CPSC is still interested in receiving incident or injury reports that are either directly related to this product recall or involve a different hazard with the same product. Please tell us about it by visiting

https://www.cpsc.gov/cgibin/incident.aspx

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury or death from thousands of types of consumer products under the agency’s jurisdiction. The CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical, or mechanical hazard. The CPSC’s work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters, and household chemicals - contributed significantly to the decline in the rate of deaths and injuries associated with consumer products over the past 30 years.

To report a dangerous product or a product-related injury, call CPSC’s Hotline at (800) 638-2772 or CPSC’s teletypewriter at (301) 595-7054. To join a CPSC e-mail subscription list, please go to https://www.cpsc.gov/cpsclist.aspx. Consumers can obtain recall and general safety information by logging on to CPSC’s Web site at www.cpsc.gov.




Add to Technorati Favorites

My Zimbio
Top Stories


Fire and Electrocution Hazards Linked to Recalled Sockets

Thursday, October 29th, 2009

Milbank Manufacturing Co. recalled single meter sockets due to fire and electrocution hazards.

The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

1,400 of these single meter sockets were maufactured at Milbank Manufacturing Co., of Kansas City, Mo. These were sold from Electrical supply distributors in N.Y., Pa., Vt. and Mass. and at local hardware stores in N.Y. from May 2009 through August 2009 for about $70

A short may occur while in use due to an incorrect bridge installed in the product, to which the meter clips are attached. If the manufacturing defect exists, all metal parts of the meter could create a shock or burns can occur if the cover is off and the meter socket is energized.  Three incidents have been reportd of the unit shorting out and no injuries were reported.

The single meter 200 amp/4 terminal sockets are used for underground utility meter installations. The meter socket is 20 3/4 inches high by 9 inches wide and 4 1/2 inches deep with 1 meter position. It is used by the approving utility to mount their electric meter to measure how much electricity a residence uses. It can be used for an underground residential application. The recalled model number 9090 appears on the right or left side of the installed meter socket. If not installed, model numbers U9090-O or R9090-O will appear on the label on the outside of the box.

Consumers should stop using the recalled product immediately and contact the electrical supply contractor who installed the sockets. Contractors will contact Milbank Manufacturing for a replacement or reimbursement. Milbank will contact all distributors and stores where the recalled product was sold.

Consumer Contact: For additional information, contact Milbank Manufacturing s Sales Engineer toll-free at (888) 537-0881 between the hours of 8 a.m. and 4 p.m. CT Monday through Friday, or visit the company s Web site at www.milbankmfg.com

Fire and Electrocution hazards linked to recalled sockets.Fire and Electrocution hazards linked to recalled sockets.Fire and Electrocution hazards linked to recalled sockets.

CPSC is still interested in receiving incident or injury reports that are either directly related to this product recall or involve a different hazard with the same product. Please tell us about it by visiting https://www.cpsc.gov/cgibin/incident.aspx

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury or death from thousands of types of consumer products under the agency’s jurisdiction. The CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical, or mechanical hazard. The CPSC’s work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters, and household chemicals - contributed significantly to the decline in the rate of deaths and injuries associated with consumer products over the past 30 years.

To report a dangerous product or a product-related injury, call CPSC’s Hotline at (800) 638-2772 or CPSC’s teletypewriter at (301) 595-7054. To join a CPSC e-mail subscription list, please go to https://www.cpsc.gov/cpsclist.aspx.

Consumers can obtain recall and general safety information by logging on to CPSC’s Web site at www.cpsc.gov.

Chairs Manufactured in China Recalled.

Thursday, October 29th, 2009

Chairs made in China and sold by Office Depot Stores have been recalled due to fall hazard by Raynor Marketing.

The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

150,000 of the Quantum Realspace PRO™ 9000 Series Mid-Back Multifunction Mesh Chair and Multifunction Mesh Chair with Headrest were sold through Raynor Marketing LTD, of West Hempstead, N.Y.  The manufacturer is Comfort Office Furniture, LTD, China aka Evergood Co. Ltd.

The bolts attaching the seat back on the recalled chairs can loosen and detach, posing a fall and injury hazard to consumers. Raynor has received reports of 33 seatback detachments and 14 injuries involving bumps and bruises.

This recall involves the Quantum Realspace PRO™ 9000 Series Mid-Back Multifunction Mesh Chair SKU # 510830 and the Quantum Realspace PRO™ 9000 Series Mesh Chair with Headrest SKU # 690690. The Realspace PRO™ Mesh Guest Chair is not involved in this recall.

These chairs were sold Exclusively at Office Depot stores nationwide and on the Web at www.OfficeDepot.com from May 2006 through August 2009. The mid-back chairs sold for about $300 and the chair with headrest for about $350.

Consumers should immediately stop using the recalled office chairs and contact Raynor to receive a free repair kit.

Consumer Contact: For additional information and to receive a free repair kit, contact Raynor toll free at (866) 244-8180 between 9 a.m. and 5 p.m. ET Monday through Friday or visit the firm’s Web site at www.Quantumchair.com/recall

Chairs manufactured in China Recalled.

CPSC is still interested in receiving incident or injury reports that are either directly related to this product recall or involve a different hazard with the same product. Please tell us about it by visiting: https://www.cpsc.gov/cgibin/incident.aspx

The U.S. Consumer Product Safety Commission is charged with protecting the public from unreasonable risks of serious injury or death from thousands of types of consumer products under the agency’s jurisdiction. The CPSC is committed to protecting consumers and families from products that pose a fire, electrical, chemical, or mechanical hazard. The CPSC’s work to ensure the safety of consumer products - such as toys, cribs, power tools, cigarette lighters, and household chemicals - contributed significantly to the decline in the rate of deaths and injuries associated with consumer products over the past 30 years.

To report a dangerous product or a product-related injury, call CPSC’s Hotline at (800) 638-2772 or CPSC’s teletypewriter at (301) 595-7054. To join a CPSC e-mail subscription list, please go to https://www.cpsc.gov/cpsclist.aspx. Consumers can obtain recall and general safety information by logging on to CPSC’s Web site at:

www.cpsc.gov.


Add to Technorati Favorites

My Zimbio
Top Stories


Blitz USA Recalls Enviro-Flo Plus Fuel Containers Due to Fire Hazard

Thursday, July 30th, 2009

recalled-blitz-gas-can.jpgThe U.S. Consumer Product Safety Commission, in cooperation with Blitz USA Inc., announced a voluntary recall of the Enviro-Flo Plus Fuel Containers (1 and 2 gallon container sizes).

Consumers should stop using recalled products immediately unless otherwise instructed.

There are currently about 4,000 of these units in use throughout the United States. The spout’s plunger cap can dislodge which can open the seal of the fuel container and allow gasoline vapors to escape. This could cause liquid gasoline to spill from the top of the container during use and result in a fire hazard.

The recall involves green Enviro-Flo Plus spouts used with 1 and 2 gallon fuel containers. Only spouts with manufacture date codes listed from 04/17/2009 through 04/19/2009 are included in the recall. The manufacture date code is etched into the side of the spout. The spouts were used on fuel containers with item numbers 81005 (1 gallon) and 81010 (2 gallon) printed on the labels.

Date codes affected include:

041709xx1 (April 17, 2009, Automated Assembly)

041809xx1 (April 18, 2009, Automated Assembly)

041909xx1 (April 19, 2009, Automated Assembly)

All spout delivery systems manufactured outside these dates or with number sequence ending in a zero (0) are not included in this recall.

These units were sold at Home improvement, mass merchandisers, automotive and various retailers nationwide from June 2009 through July 2009 for between $6 and $10.

Consumers should immediately empty their gasoline container and contact Blitz for a free replacement spout delivery system. The gasoline container should not be used until a replacement spout delivery system is installed on the container. For additional information, contact Blitz Inc. at (888) 540-5177 between 8 a.m. and 5 p.m. CT Monday through Friday, or visit the firm’s Web site at www.blitzusa.com




Add to Technorati Favorites

My Zimbio
Top Stories


DEWALT Recalls Framing Nailers Due to Serious Injury Hazard

Sunday, June 28th, 2009

dewaltnailgun.jpgThe U.S. Consumer Product Safety Commission, in cooperation with DEWALT announced a voluntary recall of the DEWALT D51825 and D51850 Framing Nailers. Consumers should stop using recalled products immediately unless otherwise instructed.

There are about 9,000 unitis involved in this recall. The bump action trigger on the framing nailers could have been incorrectly assembled during production, which would allow the nailer to eject a fastener unexpectedly or cause the trigger lock-off not to function. This can pose a serious injury hazard to the user or bystander.The DEWALT framing nailers with model numbers and date codes listed below are the ones being recalled:
 

Model Number Description

Date

Code

Range
D51825 Clipped Head Framing Nailer 20080249-20082749
D51850 Full Round Head Framing Nailer 20080249-20082749

These units were sold at Wholesale distributors and retailers nationwide from January 2008 through September 2008 for about $280.For additional information, go to the CPSC website or contact DEWALT toll-free at (877) 437-7181 between 8 a.m. and 5 p.m. ET Monday through Friday or visit the firm’s Web site at www.DEWALT.com


Add to Technorati Favorites

My Zimbio
Top Stories


Fluke Digital Clamp Meter Recalled

Sunday, May 17th, 2009

fluke-meter.jpgThe U.S. Consumer Product Safety Commission and Health Canada, in cooperation with the Fluke Corporation announced a voluntary recall of model numbers 333 through 337 of the Fluke Digital Clamp Meter. Consumers should stop using recalled products immediately unless otherwise instructed.

The meters can fail to give an appropriate voltage reading, resulting in the operator falsely believing the electrical power is off, posing a shock, electrocution, or thermal burn hazard.

Fluke has received three reports of clamp meters displaying an incorrect voltage reading. No injuries have been reported. Click here to learn more.




Add to Technorati Favorites

My Zimbio
Top Stories


HP Recalls 70,000 Notebook Computers Due to Fire Hazard

Friday, May 15th, 2009

FOR IMMEDIATE RELEASEMay 14, 2009Release # 09-221
Firm’s Recall Hotline: (800) 889-2031
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

HP Recalls Notebook Computer Batteries Due to Fire HazardWASHINGTON, D.C. - The U.S. Consumer Product Safety Commission and Health Canada, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. Name of Product: Lithium-Ion batteries used in Hewlett-Packard and Compaq notebook computers

Units: About 70,000

Importer: Hewlett-Packard Co., of Palo Alto, Calif.

Hazard: The recalled lithium-ion batteries can overheat, posing a fire and burn hazard to consumers.

Incidents/Injuries: The firm and CPSC are aware of two reports of batteries that overheated and ruptured, resulting in flames/fire that caused minor property damage. No injuries have been reported.

Description: The recalled lithium-ion rechargeable batteries are used with various HP and Compaq notebook computers. Models that can contain a recalled battery include:

HP Pavilion

dv2000

dv2500

dv2700

dv6000

dv6500

dv6700

dv9000

dv9500

dv9700

Compaq Presario

A900

C700

F700

V3000

V3500

V3700

V6000

V6500

V6700

HP

G6000

G7000

HP Compaq

6720s

The notebook model is located at the top of the service label on the bottom of the notebook. Batteries that can be subject to the recall will have one of the following bar code labels (^ in the code can be any letter or number):

62940^^AXV^^^^

65033^^B7U^^^^

65033^^B7V^^^^

65033^^BGU^^^^

65035^^B7U^^^^

65035^^B7V^^^^

65035^^BGU^^^^

65035^^BGV^^^^

67059^^V8U^^^^

67059^^V8V^^^^

Sold at: Computer and electronics stores nationwide, hp.com and hpshopping.com from August 2007 through March 2008 for between $500 and $3000. The battery packs were also sold separately for between $100 and $160.

Manufactured in: China

Remedy: Consumers should immediately remove the recalled battery from their notebook computer and contact HP to determine if their battery is included in the recall and to request a free replacement battery. After removing the recalled battery from their notebook computer, consumers may use the AC adapter to power the computer until a replacement battery arrives. Consumers should only use batteries obtained from HP or an authorized reseller.

Consumer Contact: For additional information, visit the HP Battery Replacement Program Web site at http://www.hp.com/support/BatteryReplacement or call (800) 889-2031 between 7 a.m. and 7 p.m. CT Monday through Friday.Media Contact: Sheila Watson at (281) 514-6552 or sheila.watson@hp.comTo see this recall on CPSC’s web site, including pictures of the recall product, please go to: http://www.cpsc.gov/cpscpub/prerel/prhtml09/09221.html


Add to Technorati Favorites
My Zimbio
Top Stories

Stud Sensors Recalled Due to Shock Hazard

Thursday, April 9th, 2009

stud-sensor-stanleyb.jpgThe U.S. Consumer Product Safety Commission, in cooperation with Stanley® Stud Sensors 200 and Stanley® FatMax® Stud Sensors 400, today announced a voluntary recall of the Stud Sensor 400. Consumers should stop using recalled products immediately unless otherwise instructed.

There are about 78,000 of these units being recalled. The recalled stud sensor models include the Stanley® Stud Sensor 200 and Stanley® FatMax® Stud Sensor 400 with model numbers 77-720 and 77-730. The model number is located in a slide-out reference guide found in the base of the sensor’s handle. The sensors are made of black plastic with a wide yellow stripe down the center. “Stanley” or “FatMax” are printed on the front of the product. A date code is printed on the inside of the battery cover. Affected sensors have date codes that do not begin with the letter “R.” They are manufactured by Solarwide Industrial Ltd., of Hong Kong .

It isn’t the unit itself that causes the shock hazard, it is reported that the stud sensor can fail to calibrate properly and not detect AC electrical wires behind the wall, therefore, posing a shock hazard to the user for the electrical wiring behind the wall.

These units were sold at Home improvement and hardware stores nationwide from November 2007 through January 2009 for between $20 and $30. Consumers should contact Stanley to determine if their stud sensor is included in the recall and to receive a free replacement sensor.For additional information, contact Stanley toll-free at (866) 215-1132 between from 8 a.m. and 5 p.m. ET Monday through Friday, visit the firm’s Web site at www.stanleytools.com  or e-mail Stanley at stanleytools@stanleycustomercare.com




Add to Technorati Favorites


My Zimbio
Top Stories

Wireless Headset Batteries Recalled by GN Netcom Due to Fire Hazard

Wednesday, October 15th, 2008

wireless-headset-2008-10.jpgThe U.S. Consumer Product Safety Commission, in cooperation with GN Netcom Inc. announced a voluntary recall of the GN9120 Wireless Headsets. Consumers should stop using recalled products immediately unless otherwise instructed.

There were about 525,000 of these units sold in the U.S. and an additional 675,000 were sold outside the U.S.

According to the CPSC an internal short circuit can cause the lithium-ion polymer batteries to overheat, posing a fire hazard. GN Netcom has received 10 reports of incidents involving overheating, including three reports of open flames and property damage to furniture on which the headsets were resting. An additional 37 reports of overheating, three reports of open flames and one report of second degree burns, requiring medical attention, was received outside the U.S.

This recall involves GN9120 wireless headsets with ATL lithium-ion polymer batteries. The headsets are intended primarily for professional use in offices and call centers. The product is sold with three components: a base station, headset and power adapter. “GN Netcom” or “GN9120″ is printed on the base station and headset. The affected batteries have part number 603028 and have a white plastic enclosure. The batteries are labeled “Made by ATL (Amperex Technology Ltd.)” and “(ATL P/N 603028).” Batteries sold as a replacement part are labeled “GN9120 battery replacement kit.”

These units were sold through GN Netcom, authorized distributors and resellers nationwide from January 2005 through September 2008 for between $150 and $350 as part of the GN9120 headset and about $20 as a replacement part.

Consumers should immediately stop using and unplug the recalled headsets. Consumers should contact GN Netcom to receive a replacement battery. For additional information, contact GN Netcom at (877) 803-6467 between 9 a.m. and 6 p.m. Monday through Friday ET, or visit the firm’s Web site at www.jabra.com.